Goldring Moving Coil Legacy

$1,999.00

In stock

Goldring Legacy

 

To ensure a record cartridge reproduces an accurate transcription of the record groove, the cartridge components must be rigidly mounted to the tone arm, whilst simultaneously allowing the tiniest movements of the diamond stylus to be transmitted, via the cantilever, to the sensing coils. The Legacy boasts an ultra low resonance magnesium metal body which is both very light and extremely strong. For convenience and rigidity, it has threaded inserts allowing the cartridge to be easily mounted and accurately aligned into the headshell. The stylus is a very low mass ‘Vital’ fine-line diamond, which is highly polished and gives extremely low distortion. To maintain rigidity, this is attached to a hard alloy cantilever which transfers the maximum level of detail from the diamond to the coils; the latter are hand wound using only the highest purity copper.

 

Cartridge Fitting Service $30.00

  • Frequency Response 20 Hz-30 kHz +/- 3 dB
  • Channel Balance within 1 dB @ 1 kHz
  • Channel Separation better than 25 dB min. @ 1 kHz
  • Sensitivity 0.25 mV +/- 1 dB @ 1 kHz
  • Static Compliance 25 mm/N
  • Dynamic Compliance @ 10 Hz 15 mm/N
  • Vertical Tracking Angle 20 °
  • Stylus Radius Vital
  • Stylus Type Non-Replaceable
  • Load Resistance 100 Ω
  • Load Capacitance 100 – 1000 pF
  • Internal Inductance 3 uH
  • Internal Resistance 7 Ω
  • Cartridge Mass 8.0 g
  • Cartridge Mass (inc. fixings) 8.9 g
  • Fixing Centre 0.5 ” (12.7 mm)
  • Playing Weight 1.5 – 2.0 g (1.7 g nom.)