The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10″ long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.
The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.
10″ MMP II long throw subwoofer driver
Rigid MDF cabinet with rear porting
Powerful 100 W Class D power amplifier – high efficiency and punchy bass delivery
Switch mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
DSP processing with all control features and crossover performed in the digital domain
Three pre-set EQ mode settings. Music / Movie / Impact
12 V trigger – provides switching control from AV amp, processor, or home automation control system
18 mm thick MDF construction
System Format Rear ported bass reflex cabinet
Lower Frequency Limit 30 Hz (-6 dB)
Upper Frequency Limit Variable 50 – 120 Hz @ 24 dB/Octave
Amplifier Output 100 W RMS
Amplifier Classification Class D with Switch mode PSU,Bass EQ Profiles Music / Movie / Impact
Phase Control 0 – 180°
Auto Sensing >3.5 mV
Input Level Requirements Standby after approximately 15 minutes if no signal sensed
Drive Unit Complement 1 x 10″ MMP II long throw driver
Input Impedance >20 K ohms
Mains Input Voltage 110 – 120 Vac – 50 – 60 Hz 220 – 240 Vac – 50 – 60 Hz. Selectable
Fuse Specification 220 – 240 VAC – T4AL/250VAC
Connection 2 x Stereo RCA, 1 x LFE RCA connection 12 V trigger (3.5 mm mono mini-jack)
External Dimensions (Including Grille and Feet (H x W x D)) 336 x 320 x 350.6 mm (131/4 x 125/8 x 1313/16″)
Standby Power Consumption <0.5 W standby
Weight 10.54 kg (23 lb 4 oz)
Sold As Single Unit