|Frequency Response||20-25,000 Hz|
|Channel Separation||23 (dB at 1 kHz)|
|Vertical Tracking Force||1.8-2.2g (2.0g standard)|
|Stylus Construction||Nude square shank|
|Recommended Load Impedance||47,000 ohms|
|Output||3.5 mV (1 kHz, 5 cm/sec.)|
|Channel Balance||1.5 dB (1 kHz)|
|Stylus Shape||2.7 x 0.26 mil Shibata|
|Coil Impedance||3.3 k ohms (1 kHz)|
|DC Resistance||485 ohms|
|Load Capacitance||100 to 200 pF|
|Coil Inductance||550 mH (1 kHz)|
|Vertical Tracking Angle||23°|
|Dimensions||17.2mm H × 18.9mm W × 28.3mm D|
|Accessories Included||Two 11mm installation screws, two 8mm installation screws, two washers, nonmagnetic screwdriver|
Audio Technica VM-95SH
or 6 weekly interest-free payments from $83.16 with what's this?
This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables.
The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required.
And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
- VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus
- Aluminum cantilever
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
Only logged in customers who have purchased this product may leave a review.