Bowers and Wilkins Marine 8

$1,699.00

or from $199.00 today & 5 weekly interest-free payments of $300.00 with Laybuy

The Bowers & Wilkins Marine 8 Outdoor Speakers is a two-way loudspeaker with a 25mm (1-in) tweeter and a 200mm (8-in) polypropylene bass/midrange driver.

It boasts an IP66 rating for incredible ruggedness when installed. Although it is the larger of the Marine loudspeakers it fits into a shallow depth of 93mm (3.7-in) with a cut-out of 249mm (9.8-in).

Pricing is for a Pairs. Product is Available to Order.

Available on back-order

The Bowers & Wilkins Marine 8 Outdoor Speakers provide strength and power for your deck, boat or outdoor space. Marine 8 is designed to survive almost anything, and its big 20cm mid/bass driver ensures a powerful, weighty sound.

The marine environment is unforgiving. Any equipment has to survive extremes of temperature, salt spray and hosing down. It’s little wonder then that most speakers designed for marine applications sacrifice sound quality for ruggedness.

Of course, any Bowers & Wilkins speaker must sound brilliant.

So these marine speakers were first designed to match exacting sound quality standards, then the necessary toughness to survive the harsh marine environment was added. Both models boast IP66 ratings when properly installed, and the metal grille and all screws are marine-grade stainless steel. The driver chassis uses a non-corroding rigid polymer and the tweeter dome has a rear support to prevent permanent deformation when hosed down. Marine 6 and Marine 8 are super-tough to deal with the most demanding installation environments, with Bowers & Wilkins superior, uncompromising audio quality.

  • Big 20cm mid/bass driver
  • It boasts an IP66 rating
  • Fits into a shallow depth of 93mm
  • Frame Diameter 292mm (11.5in) / Cut-out Diameter 253mm (10in) / Depth 93mm (3.7in)
Easy installation

A shallow 93mm mounting depth means Marine 8 fits almost anywhere.

Description 2-way system
Drive units 1x Ø25mm (1-in) soft dome tweeter
1x Ø200mm (8-in) polypropylene
cone bass/midrange
Frequency range 36Hz – 26kHz
Recommended amplifier power 20W – 80W
Sensitivity 90dB (2.83V, 1m)
Nominal impedance
Pre-mount kit C8
Back box 6C (not suitable for marine applications)