Copland CSA150 Hybrid Integrated Amplifier

$9,895.00$10,195.00

The CSA150 is the top model in the new line of Copland CSA series amplifiers. Under dynamic conditions this current feedback power plant will deliver several times its rated power – enough to drive almost any loudspeaker.

The CSA150 provides four digital inputs, five analogue inputs and a 150 Watt per channel power amplifier. It borrows its basis circuitry from the CSA100. However, to increase power and maximize performance we have upgraded the power supply with a larger toroidal transformer and a separate fully regulated power supply for the power amplifier driver stages.

Furthermore, the heat zinc area has been increased and the chassis resized in order to accommodate the additional hardware.

• Employing the Copland double triode gain stage with MOS-FET buffering ensuring a tight interface between the tube and the solid-state parts of the amplifier.

• Immunity to mains fluctuations, load demands and noise interference by use of wide bandwidth power supply regulation, not only for the low-level stages of the amplifier, but also by active regulation of the power amplifier driver stages.

• D/A converter with multiple S/PDIF inputs, PCM, and DSD capabilities using the ES9018 Reference 32-bit DAC in quad-mono configuration, 8 mono to 2 stereo configurations.

• Besides the digital coax and optical inputs an additional Bluetooth aptX module makes airborne sources available in HD quality.

• RCA inputs as well as balanced XLR. For the vinyl enthusiast the CSA150 has RIAA input for MM cartridges.

• Alps Blue Velvet volume control

• Classic tape loop in/out function as well as pre-out terminal and a front facing 6.3mm headphone output.

Output power: 2×150 W into 8 ohms load.

Minimum load: 2 ohms

Analog Inputs:

1x balanced (XLR)
3x unbalanced (RCA)

Digital Inputs:

1x coaxial S/PDIF.
2x optical S/PDIF.
1x USB.
1* aptX HD Bluetooth (Optional Extra)

Line output:

1x unbalanced (RCA)

1x Pre-out /unbalanced variable (RCA)

Line input impedance: 50 K ohms

Phono input impedance: 47 K ohms (MM)

Phono input Capacitance: 200 pF

Line Inputs sensitivity: 270 mV

Phono sensitivity: 2.6 mV

Frequency response: 10 Hz – 150 kHz -3dB

T.H.D: Better than 0.04 %

Signal / noise IHF-A: Better than 90dB

Phase: Inverting

Headphone amp.Gain: 22 dB @ 100 ohms load impedance

Headphone amp. Out imp:40 ohms

Headphone amp. T.H.D: Better than 0.05 %.

Freq. resp. 10 Hz – 150 kHz / -3dB

Vacuum tubes:1 pc. 6922

Power consumption: Max.700 W

Dimensions: 435mm (w) x 165mm (H) x 370mm (D)

Shipping weight: 15 Kg.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.